Access keys | Skip to primary navigation | Skip to secondary navigation | Skip to content | Skip to footer |
Problems viewing this site
Home > Publications > Technical Information

Gaming Machines

These documents relate to Queensland's technical requirements for gaming machines.

Title Date File type Link P
ANZ Gaming Machine National Standards (v 9.0) 23 March 2007 pdf download (885 K) no
The purpose of this document is to work towards creating one basic standard for gaming machines throughout Australia and New Zealand. It describes requirements which gaming machine manufacturers must conform to when developing their equipment.
ANZ Gaming Machine National Standards (v 8.0) 1 December 2004 pdf download (660 K) no
The purpose of this document is to work towards creating one basic standard for gaming machines throughout Australia and New Zealand. It describes requirements which gaming machine manufacturers must conform to when developing their equipment.
ANZ GM NS QLD Appendix (v 9.0.1) 3 October 2007 zip download (300 K) no
This document details the additional or changed Gaming Machine minimum requirements with respect to the ANZ GM National Standards Document v9.0.
ANZ GM NS QLD Appendix (v 8.0.2) 21 July 2006 zip download (215 K) no
This document details the additional or changed Gaming Machine minimum requirements with respect to the ANZ GM National Standards Document v8.0 and ANZ GM NS QLD Appendix (v 8.0.1)
ANZ GM NS QLD Appendix (v 8.0.1) 1 October 2004 zip download (85 K) no
This document details the additional or changed Gaming Machine minimum requirements with respect to the ANZ GM National Standards Document v8.0.
Approved Locks (v 1.4) 22 July 2005 html view no
This document lists the locks which have been tested and approved by QOGR for use in gaming equipment.
Approved Seals and Suppliers (v 1.4) 1 September 2006 doc download (810 K) no
This document is a list of approved physical seals and approved seal suppliers.
Console Specifications (v 1.3) 15 September 2004 zip download (255 K) no
This document specifies attributes of gaming machine consoles, emphasising their security and safety. This allows prospective purchasers to verify their suitability.
Consoles - Additional Information 2004 html view no
This is a guide to manufacturers and purchasers of consoles.
Console Universal Template v1.2 September 2002 zip download (265 K) no
This ZIP file contains a general DXF and a corresponding JPG picture of the current QLD console universal template. This may assist console manufacturers in console design.
Reqs. Commissioning & Provision of EGMs v4.0 11 April 2005 pdf download (60 K) no
To help ensure that installed EGMs are safe and secure.
Requirements for the Prov. of Power to EGMs (v 2.4) 19 August 2005 zip download (55 K) no
This document lists minimum requirements for the supply of mains power to gaming machines.
EGM Card & Reader Requirements (v 1.3) 18 September 2000 doc download (35 K) no
This document lists standards for gaming machine manufacturers and suppliers of card systems, such as dimensions required and acceptable card data.
Program Storage Device Verification (v 1.7) 19 March 2007 pdf download (85 K) no
Technical Requirements for the in field verification of PSDs in EGMs, Jackpot Triggering Devices and other electronic Gaming Equipment.
EGM Program Signature Algorithms (v 1.4) 19 October 2004 doc download (465 K) no
This document details the acceptable EGM Program Signature Algorithms (PSAs) for use with the QOGR EGM communications protocol (QCOM).
Principles for Remotely Upgradeable EGMs (v1.3) 22 November 2006 doc download (315 K) no
To propose and publish possible technical frameworks for remotely upgradeable Electronic Gaming Machines for the purpose of eliciting industry feedback and comments, with the longterm objective of laying the foundation for remotely upgradeable Electronic Gaming Machines or similar devices.
Key:
P Also available in hardcopy

For further information:

Last reviewed 4 October 2007